The VAG includes: Volkswagen, Audi, Škoda and Seat. The same engines are installed in all of these vehicles. For many years now we have specialized in engine repairs for these vehicles. Our colleagues have become experts when it comes to repairing engines from the VAG Group. There are many causes of engine damage: damage to the timing chain, high oil loss, material fatigue, etc.

So that you can fully enjoy driving your car again and quickly forget the engine damage, we offer engine repairs for a large number of models and engines.

Do you have questions about your engine damage?

We would be happy to provide you with a non-binding offer for your vehicle. Just send us a message via our contact form. It is important that you either give us the engine code of your vehicle or the vehicle identification number in your message. We can then use this to determine the engine code for you. Of course, we are also personally available to answer any questions you may have about engine damage. Please have the vehicle data ready for our conversation.

On this page, we have compiled a list of how you can avoid engine damage.

With us you get the 1.4 TFSI CZD exchange engine including installation in our master car workshop. We only overhaul the engines in-house according to the manufacturer's specifications.

We carry out the following work on the engine

In principle, we completely disassemble the engines, clean them and check all components for wear. We then replace all worn or damaged components without exception. The crank mechanism is then measured and the bearing shells renewed. In addition, the liners are honed or drilled to oversize, depending on the damage pattern. Depending on the level of overhaul, the replacement engine also receives new piston rings or new pistons.

In addition, we check the cylinder head for war page and plan it if necessary. We also check the valve guides. We machine the valves and valve seats accordingly or replace them with new ones and additionally grind them in. Furthermore, we also install new valve stem seals.

Extra cost

In addition, when installing the engine, there are costs for oil, oil filter and small parts as well as any additional work (e.g. damaged threads, engine bearings, additional work on axle parts, replacement of defective add-on parts, etc.). In many vehicles, we also have to drain the climate gas in order to be able to carry out the engine replacement. We then fill it up completely again. This can continue to result in costs for the shortage of gas.

For reasons of liability, we do not install any spare parts you have brought with you in our workshop.

We offer you the collection of your vehicle throughout Germany at favorable conditions.

Checking the injectors

With the 1.4 TFSI CZD replacement engine, we definitely recommend that you also have the injectors checked. Please note that we can only check and ultrasonically clean the injectors so that the spray pattern fits again. Unfortunately, we have no influence on whether the mechanics show a defect after a while.

Note on the old engine

Your 1.4 TFSI CZD exchange engine must be capable of being overhauled: This means that the cylinder head and engine block must not show any irreparable damage such as cracks or fractures. Furthermore, the valves must not be torn off. Your engine must also not be made up of defective parts. If your engine cannot be overhauled, we charge a surcharge for the additional effort. Please read our note on the overtaking ability.

We also offer the 1.4 TFSI CZD replacement engine for sale to garages. If you are interested, please contact us.

Do you still have questions about the 1.4 TFSI CZD replacement engine?

Do you have any questions about our 1.4 TFSI CZD exchange engine, or would you like an additional individual offer? Then send us a message using our contact form. Please always include your vehicle identification number in your message. You are also welcome to contact us by phone if you have any questions.

Do you drive an Audi, VW, Škoda or Seat 1.0 TSI engine with which you have suffered engine damage?

Then we can help you. You will receive the engine, including installation in our master car workshop. We only overhaul the engines in-house according to the manufacturer's specifications.

We carry out the following work on the engine

In principle, we completely disassemble the engines, clean them and check all components for wear. We then replace all worn or damaged components without exception. The crank mechanism is then measured and the bearing shells renewed. In addition, the liners are honed or drilled to oversize, depending on the damage pattern. Depending on the level of overhaul, the replacement engine also receives new piston rings or new pistons.

In addition, we check the cylinder head for warpage and plan it if necessary. We also check the valve guides. We machine the valves and valve seats accordingly or replace them with new ones and additionally grind them in. We also install new valve stem seals.

Extra cost

In addition, when installing the engine, there are costs for oil, oil filter and small parts as well as any additional work (e.g. damaged threads, engine bearings, additional work on axle parts, replacement of defective add-on parts, etc.). In many vehicles, we also have to drain the climate gas in order to be able to carry out the engine replacement. We then fill it up completely again. This can continue to result in costs for the shortage of gas.

For reasons of liability, we do not install any spare parts you have brought with you in our workshop.

We offer you the collection of your vehicle throughout Germany at favorable conditions.

Checking the injectors

With the 1.0 TSI engine, we definitely recommend that you also have the injectors checked. Please note that we can only check and ultrasonically clean the injectors so that the spray pattern fits again. Unfortunately, we have no influence on whether the mechanics show a defect after a while.

Note on the old engine

Your 1.0 TSI engine must be able to be overhauled: That means the cylinder head and engine block must not show any irreparable damage such as cracks or fractures. Furthermore, the valves must not be torn off. Your engine must also not be made up of defective parts. If your engine cannot be overhauled, we charge a surcharge for the additional effort. Please read our note on the overtaking ability.

We also offer the 1.0 TSI engine for sale to garages. If you are interested, please contact us.

Do you still have questions about the 1.0 TSI engine CHZ?

Do you have any questions about the 1.0 TSI engine, or would you also like an individual offer? Then send us a message using our contact form. Please always include your vehicle identification number in your message. You are also welcome to contact us by phone if you have any questions.

Do you drive a VW, Škoda or Seat 1.4 16V engine with one of the above engine codes that has suffered engine damage?

Engine codes: AUA | BBY | AKQ | BBZ | BCA | AXP | AUB | APE | AHW | AFH | BKY | CGGA | CGGB | BUD | BXW

Then we can help you. You will receive the 1.4 16V exchange engine including installation in our master car workshop. We only overhaul the engines in-house according to the manufacturer's specifications.

We carry out the following work on the overhauled engine:

In principle, we completely disassemble the engines, clean them and check all components for wear. We then replace all worn or damaged components without exception. The crank mechanism is then measured and the bearing shells renewed. In addition, the liners are honed or drilled to oversize depending on the damage pattern. Depending on the level of overhaul, the replacement engine also receives new piston rings or new pistons.

In addition, we check the cylinder head for warpage and plan it if necessary. We also check the valve guides. We machine the valves and valve seats accordingly or replace them with new ones and additionally grind them in. Furthermore, we also install new valve stem seals. On request, we will also be happy to install a new toothed belt set with water pump for an additional charge.

Additional costs

In addition, when installing the engine, there are costs for oil, oil filter and small parts as well as any additional work (e.g. damaged threads, engine bearings, additional work on axle parts, replacement of defective add-on parts, etc.). In many vehicles, we also have to drain the climate gas in order to be able to carry out the engine replacement. We then fill it up completely again. This can continue to result in costs for the shortage of gas.

For reasons of liability, we do not install any spare parts you have brought with you in our workshop.

We offer you the collection of your vehicle throughout Germany at favorable conditions.

Note on the old engine:

Your engine must be able to be overhauled: That means the cylinder head and engine block must not show any irreparable damage such as cracks or fractures. Furthermore, the valves must not be torn off. Your engine must also not be made up of defective parts. If your engine cannot be overhauled, we will charge a surcharge for the additional work of up to a maximum of €400 including VAT.

Selling the engine to garages

We will deliver you a refurbished exchange engine. The exchange engine is ready to install, without oil and without attachments and without a toothed belt.
We charge a deposit of €400.00 including VAT for the old part of the 1.4 16V engine. The replacement engine is delivered in a packing box. We charge an additional €100.00 including VAT deposit for this box. You will get the deposit back when we have received the box with the old part and the engine has been classified as overhaulable. The old part must be sent back to us in any case!

Do you still have questions about the 1.4 16V exchange engine?

Do you have any questions about our engine, or would you also like an individual offer? Then send us a message using our contact form. Please always include your vehicle identification number in your message. You are also welcome to contact us by phone if you have any questions.