Does your 1.4 TSI engine have too little compression on one cylinder? Or does your vehicle have a timing chain damage?

Then we can help you: You will receive a completely overhauled engine from us, including installation in our master car workshop.

We carry out the following work on the engine:

In principle, we completely disassemble the 1.4 TSI engine, clean it and check all components for wear. We then replace all worn or damaged components without exception. The crank mechanism is then measured and the bearing shells renewed. In addition, the liners are honed, bushed or drilled to oversize depending on the type of damage. The replacement engine then receives new, reinforced pistons with a ring carrier in the 1st piston ring.

In addition, we check the cylinder head for warpage and plan it if necessary. We also check the valve guides. We machine the valves and valve seats accordingly or replace them with new ones and additionally grind them in. We also install new valve stem seals. Finally, the chain drive is renewed and a new timing chain installed. We are also happy to install a new cylinder head for an additional charge.

Don't know which motor you need? Send us the vehicle identification number. We will be happy to make you a suitable offer.

Please note our experiences with the 1.4 TSI engine:

We know from our experience that the turbocharger in the 1.4 TSI engines also has to be replaced very frequently. You should therefore also take this into account. Depending on the type of damage, there is also increased oil entry in the intake area with this engine. This always leads to problems with the control valve. We would be happy to make you a complete offer.

Extra Cost

In addition, when installing the engine, there are costs for oil, oil filter and small parts as well as any additional work (e.g. damaged threads, engine bearings, additional work on axle parts, replacement of defective add-on parts, etc.). In many vehicles, we also have to drain the climate gas in order to be able to carry out the engine replacement. We then fill it up completely again. This can continue to result in costs for the shortage of gas.

For reasons of liability, we do not install any spare parts you have brought with you in our workshop.

We offer you the collection of your vehicle throughout Germany at favorable conditions.

Checking the injectors

With the 1.4 TSI engine, we definitely recommend that you also have the injectors checked. Please note that we can only check and ultrasonically clean the injectors so that the spray pattern fits again. Unfortunately, we have no influence on whether the mechanics show a defect after a while.

Note on the old engine:

Your 1.4 TSI engine must be able to be overhauled: That means the cylinder head and engine block must not show any irreparable damage such as cracks or fractures. Furthermore, the valves must not be torn off. Your engine must also not be made up of defective parts. If your engine cannot be overhauled, we will charge a surcharge for the additional work of up to a maximum of €600 including VAT. Please read our note on the Overtaking ability.

We also offer the 1.4 TSI engine for sale to garages. If you are interested, please contact us.

Engine codes: CAV | CTH | CAX | BLG | BMY

Why does engine damage occur?

Together with the R.U.F. GmbH  we have created a video about the problem with this engine. We have disassembled the engine and will show you why engine damage occurs.

Do you have any questions?

Do you have any questions about our 1.4 TSI engine, or would you like an additional individual offer? Then send us a message using our contact form. Please always include your vehicle identification number in your message. You are also welcome to contact us by phone if you have any questions.