The 1.8 / 2.0 TFSI | TSI EA888 Engine of the 1st and 2nd Generation
The 1.8- and 2.0-litre TFSI engines of the 1st and 2nd generation were used in various Volkswagen Group vehicle models.
At Wagner Motoren, you receive a professionally remanufactured 1.8- or 2.0-litre TFSI replacement engine including gaskets. The complete overhaul is carried out exclusively at our own premises. Upon request, we can also professionally install the engine in our master automotive workshop.
1.8 / 2.0 TFSI of the 1st and 2nd Generation in Trouble? We Are Here to Help.
Does your vehicle with a 1.8- or 2.0-litre TFSI engine of the 1st or 2nd generation suffer from high oil consumption, timing chain damage or a noticeable loss of power?
At Wagner Motoren, you receive a professionally remanufactured 1.8- or 2.0-litre TFSI replacement engine with the engine code CDA, CDN, CDH, CAE, CAW, CCZ, CEA or CES, including gaskets. The engine is completely overhauled at our own premises. Upon request, we can also professionally install it in our master automotive workshop.
From Engine Damage to Like-New Condition
We completely dismantle the 1.8- or 2.0-litre TFSI engine, clean it thoroughly and inspect all components for wear and damage.
We consistently replace worn or damaged components with high-quality new parts. The complete timing chain drive is renewed as part of the engine overhaul, and a reinforced timing chain with a modified tensioner is installed.
Crankshaft Assembly & Engine Block
The crankshaft assembly is precisely measured and the bearing shells are replaced. Depending on the specific damage, the cylinder liners are professionally honed or bored to the required oversize.
The 1.8- or 2.0-litre TFSI replacement engine is then fitted with modified pistons featuring wider oil control rings. These are selected to match the reconditioned engine block and installed professionally.
Cylinder Head, Valve Train & Fuel Injectors
We carefully inspect the cylinder head for distortion and professionally resurface it if necessary. We also inspect the valve guides and the entire valve train.
Depending on their condition, the valves and valve seats are reconditioned or replaced with new parts and then professionally ground in. New valve stem seals are also included in the engine overhaul. Upon request, we can also install a new cylinder head at additional cost.
We additionally recommend having the fuel injectors inspected. The injectors can be tested and ultrasonically cleaned to restore a spray pattern that meets the technical requirements.
However, the long-term reliability of the mechanical components inside the fuel injectors cannot be guaranteed. Mechanical faults may later make further maintenance or replacement necessary.
← Fuel Injector InspectionRequirement: Engine Must Be Suitable for Remanufacturing
The cylinder head and engine block must not have irreparable damage such as cracks or fractures. The valves must not have broken off, and the engine must not have been assembled from damaged individual parts.
If the supplied engine is not suitable for remanufacturing, the resulting additional work will be charged separately.
← Information on Remanufacturing SuitabilityPossible Additional Costs
Further damage often only becomes visible after the engine has been removed and dismantled. The costs of oil, oil filters, small parts or additional work therefore cannot always be quoted as a fixed amount in advance.
This may include damaged threads, defective engine mounts, work on axle components or the replacement of damaged ancillary parts. If refrigerant has to be drained, additional costs may also arise for the quantity required when refilling the system.
For Automotive Workshops Only
We also supply our remanufactured 1.8- and 2.0-litre TFSI replacement engines with the engine codes CDA, CDN, CDH, CAE, CAW, CCZ, CEA and CES to automotive workshops. We will be pleased to prepare an individual quotation for you.
For liability reasons, we do not install customer-supplied spare parts in our master automotive workshop.
Collection Throughout Germany
Are you unable to bring your vehicle to us yourself? We can arrange collection from anywhere in Germany at attractive rates – conveniently, reliably and without complications.

