The 1.2 TSI CBZ Engine from Audi, SEAT, Škoda and Volkswagen
The 1.2 TSI with the engine codes CBZ, CBZA, CBZB and CBZC was used in numerous vehicle models from Audi, SEAT, Škoda and Volkswagen. These include the Audi A1 and A3, SEAT Altea, Ibiza IV, Leon and Toledo, Škoda Fabia II, Octavia II, Rapid, Roomster and Yeti, as well as the VW Beetle, Caddy III, Golf VI, Jetta IV, Polo and Touran.
At Wagner Motoren, you receive a professionally remanufactured 1.2 TSI replacement engine. The complete overhaul is carried out exclusively at our own premises. Upon request, we can also professionally install the engine in our master automotive workshop.
1.2 TSI CBZ in Trouble? We Are Here to Help.
Has your Audi A1, A3, SEAT Altea, Ibiza IV, Leon, Toledo, Škoda Fabia II, Octavia II, Rapid, Roomster, Yeti, VW Beetle, Caddy III, Golf VI, Jetta IV, Polo or Touran with a 1.2 TSI CBZ engine suffered engine damage?
At Wagner Motoren, you receive a professionally remanufactured 1.2 TSI replacement engine with the engine code CBZ, CBZA, CBZB or CBZC. The engine is completely overhauled at our own premises. Upon request, we can also professionally install it in our master automotive workshop.
From Engine Damage to Like-New Condition
We completely dismantle the 1.2 TSI engine, clean it thoroughly and inspect all components for wear and damage.
We consistently replace worn or damaged components with high-quality new parts. The oil pump and the complete timing chain drive are always replaced as part of the engine overhaul.
Crankshaft Assembly & Engine Block
The crankshaft assembly is precisely measured and the bearing shells are replaced. Depending on the specific damage, the cylinder liners are professionally honed or bored to the required oversize.
Depending on the overhaul level, the 1.2 TSI CBZ replacement engine receives new piston rings or completely new pistons selected to match the reconditioned engine block.
Cylinder Head, Valve Train & Fuel Injectors
We carefully inspect the cylinder head for distortion and professionally resurface it if necessary. We also inspect the valve guides and the entire valve train.
Depending on their condition, the valves and valve seats are reconditioned or replaced with new parts and then professionally ground in. New valve stem seals are also included in the engine overhaul.
We additionally recommend having the fuel injectors inspected. The injectors can be tested and ultrasonically cleaned to restore a spray pattern that meets the technical requirements.
← Fuel Injector InspectionRequirement: Engine Must Be Suitable for Remanufacturing
The cylinder head and engine block must not have irreparable damage such as cracks or fractures. The valves must not have broken off, and the engine must not have been assembled from damaged individual parts.
If the supplied engine is not suitable for remanufacturing, the resulting additional work will be charged separately.
← Information on Remanufacturing SuitabilityPossible Additional Costs
Further damage often only becomes visible after the engine has been removed and dismantled. The costs of oil, oil filters, small parts or additional work therefore cannot always be quoted as a fixed amount in advance.
This may include damaged threads, defective engine mounts, work on axle components or the replacement of damaged ancillary parts. If refrigerant has to be drained, additional costs may also arise for the quantity required when refilling the system.
For Automotive Workshops Only
We also supply our remanufactured 1.2 TSI replacement engines with the engine codes CBZ, CBZA, CBZB and CBZC to automotive workshops. We will be pleased to prepare an individual quotation for you.
For liability reasons, we do not install customer-supplied spare parts in our master automotive workshop.
Collection Throughout Germany
Are you unable to bring your vehicle to us yourself? We can arrange collection from anywhere in Germany at attractive rates – conveniently, reliably and without complications.
