The 2.0 TDI Engine
The 2.0 TDI with the engine was used in numerous vehicle models from Audi, Seat, Škoda and Volkswagen. These include the Audi A3 and Q3, Seat Alhambra, Škoda Superb as well as the VW Beetle, EOS, Golf VI, Jetta IV, Sharan and Tiguan.
At Wagner Motoren, you receive a professionally remanufactured 2.0 TDI replacement engine. The complete overhaul is carried out exclusively at our own premises. Upon request, we can also professionally install the engine in our master automotive workshop.
2.0 TDI CFF/CAG in Trouble? We Are Here to Help.
Has your Audi A3, Q3, Seat Alhambra, Škoda Superb, VW Beetle, EOS, Golf VI, Jetta IV, Sharan or Tiguan suffered engine damage?
At Wagner Motoren, you receive a professionally remanufactured 2.0 TDI replacement engine with the engine code CFF, CFFA, CFFB or CAG. The engine is completely overhauled at our own premises. Upon request, we can also install it in our master automotive workshop.
From Engine Damage to Like-New Condition
We completely dismantle the 2.0 TDI engine, clean it thoroughly and inspect all components for wear and damage.
We consistently replace worn or damaged components with high-quality new parts. The oil pump is always replaced as part of the engine overhaul.
Crankshaft Assembly & Engine Block
The crankshaft assembly is precisely measured and the bearing shells are replaced. Depending on the specific damage, the cylinder liners are professionally honed or bored to the required oversize.
Depending on the overhaul level, the 2.0 TDI replacement engine receives new piston rings or completely new pistons selected to match the reconditioned engine block.
Cylinder Head & Valve Train
We carefully inspect the cylinder head for distortion and professionally resurface it if necessary. We also inspect the valve guides and the entire valve train.
Depending on their condition, the valves and valve seats are reconditioned or replaced with new parts and then professionally ground in. New valve stem seals are also included in the engine overhaul.
Requirement: Engine Must Be Suitable for Remanufacturing
The cylinder head and engine block must not have irreparable damage such as cracks or fractures. The valves must not have broken off, and the engine must not have been assembled from damaged individual parts.
If the supplied engine is not suitable for remanufacturing, the resulting additional work will be charged separately.
← Information on Remanufacturing Suitability →Possible Additional Costs
Further damage often only becomes visible after the engine has been removed and dismantled. The costs of oil, oil filters, small parts or additional work therefore cannot always be quoted as a fixed amount in advance.
This may include damaged threads, defective engine mounts, work on axle components or the replacement of damaged ancillary parts. If refrigerant has to be drained, additional costs may also arise for the quantity required when refilling the system.
For Automotive Workshops Only
We also supply our remanufactured 2.0 TDI replacement engines with the engine codes CFF, CFFA, CFFB and CAG to automotive workshops. We will be pleased to prepare an individual quotation for you.
For liability reasons, we do not install customer-supplied spare parts in our master automotive workshop.
Collection Throughout Germany
Are you unable to bring your vehicle to us yourself? We can arrange collection from anywhere in Germany at attractive rates – conveniently, reliably and without complications.

