The 2.0 TDI Engine in the VW T5
The 2.0 TDI was used in the VW T5, among other models. Typical types of damage include increased oil consumption or timing belt damage, which can cause serious consequential damage to the engine.
At Wagner Motoren, you receive a professionally remanufactured 2.0 TDI CAA/CCH replacement engine. The complete overhaul is carried out exclusively at our own premises. Upon request, we can also professionally install the engine in our master automotive workshop.
2.0 TDI CAA/CCH in Trouble? We Are Here to Help.
Does your vehicle with a 2.0 TDI CAA or CCH engine suffer from high oil consumption or timing belt damage?
At Wagner Motoren, you receive a professionally remanufactured 2.0 TDI replacement engine with the engine code CAA or CCH. The engine is completely overhauled at our own premises. Upon request, we can also professionally install it in our master automotive workshop.
From Engine Damage to Like-New Condition
We completely dismantle the 2.0 TDI engine, clean it thoroughly and inspect all components for wear and damage.
We consistently replace worn or damaged components with high-quality new parts. All work is carried out professionally at our own premises.
Crankshaft Assembly & Engine Block
The crankshaft assembly is precisely measured and the bearing shells are replaced. Depending on the specific damage, the cylinder liners are professionally honed or bored to the required oversize.
The 2.0 TDI replacement engine is then fitted with new pistons selected to match the reconditioned engine block.
Cylinder Head & Valve Train
As part of the engine overhaul, the 2.0 TDI CAA/CCH engine receives a new cylinder head. All valve train components are professionally installed and inspected in accordance with the manufacturer’s specifications.
Particularly after timing belt damage, we carefully inspect the valve train and adjacent components for possible consequential damage.
Requirement: Engine Must Be Suitable for Remanufacturing
The engine block must not have irreparable damage such as cracks or fractures. The valves must not have broken off, and the engine must not have been assembled from damaged individual parts.
If the supplied engine is not suitable for remanufacturing, the resulting additional work will be charged separately.
← Information on Remanufacturing SuitabilityPossible Additional Costs
Further damage often only becomes visible after the engine has been removed and dismantled. The costs of oil, oil filters, small parts or additional work therefore cannot always be quoted as a fixed amount in advance.
This may include damaged threads, defective engine mounts, work on axle components or the replacement of damaged ancillary parts. If refrigerant has to be drained, additional costs may also arise for the quantity required when refilling the system.
For Automotive Workshops Only
We also supply our remanufactured 2.0 TDI replacement engines with the engine codes CAA and CCH to automotive workshops. We will be pleased to prepare an individual quotation for you.
For liability reasons, we do not install customer-supplied spare parts in our master automotive workshop.
Collection Throughout Germany
Are you unable to bring your vehicle to us yourself? We can arrange collection from anywhere in Germany at attractive rates – conveniently, reliably and without complications.
